SIP350AC AM/DSB Transmitter

The transmitter insertion panel, along with its companion manual, provides instruction in the basic principles of Amplitude Modulation (AM). The panel contains an RF oscillator, modulator, RF amplifier, audio amplifier, microphone input, and whip antenna. Two controls provide for audio level control of modulation, with a separate control for carrier suppression. The AM modulated signal or the signal with carrier suppression can be observed. The basic concepts of single-sideband transmission are demonstrated by showing how the carrier is suppressed. The panel can be used in conjunction with the AM receiver (SIP327BC). The course provides for 40 hours of instruction.

	Painted Panel with black symbols. Green mask on PCB side. Panel measures 8.5 x 14 inches.
	A complete low power AM Transmitter which produces a 1 MHz modulated carrier frequency.
	Provides either AM modulation or suppressed carrier double-sideband modulation.
	Teaches the principles of AM transmission
	Approximately 75 milliwatts of DC power into the final RF amplifier.
	Crystal controlled oscillator.
	There are 14 test points.
	Built in function generator, 400 Hz.
	Microphone and preamplifier provided for voice modulation. Can also be modulated by an audio cassette player or other audio sources.
	Gold plated contacts to power supply.
	A comprehensive student/teacher Manual is included. The Manual combines the SIP350AC and SIP353C courses.

ORDERING INFORMATION
For this Transmitter Course with Manual, order SIP350AC. For additional student manuals, order SIP350ACM.
TOTAL WEIGHT: 2.5 lbs (1.14 Kg)
PANEL SIZE: 8.5 x 14 inches