368spec

Curriculum
Details

Sample
Activities

SPECIFICATIONS

SIP368 Pulse Radar

The Pulse Radar Trainer offers realistic training in radar techniques at low cost. The Trainer provides basic techniques in radar ranging, as well as in secondary IFF radar. The radar tracks three or more electronic targets whose range and speed of movement is simulated while its Azimuth is real. The computer screen provides both a sector scan and an A scan. The training equipment interfaces with a computer to provide computer-aided diagnostic training. The computer screen is Windows-based and the software contains an electronic system diagnostic section for troubleshooting. Approximately 100 hours of instruction.

EQUIPMENT SPECIFICATIONS

	The Radar Control Panel, size 11.25 x 14 inches, is painted on one side and has a green mask screen on the PCB side.
	Stepper Motor Control Panel sets the speed of scanning.
	Dish Antenna with 4 degrees of beamwidth.
	Radiated infrared beam provides target range of approximately 8 to 10 feet (may vary).
	Three electronic targets radiated on 10.5 GHz. Target images identifiable as Targets 1, 2, and 3.
	Target Horn 8 dB flare design provides fan-shaped pattern.
	Target radiated effective power: 50 mW. Target trigger at 14 KHz. Target identification by pulse beamwidth. Target serves as secondary IFF radar. Target range: 0.25 miles/Km up to 16 miles. Target speeds: 0-960 miles (1544 Km) per hour.
	Switchable speeds of 120, 240, 480, and 960 miles per hour (194-1540 Km/hr).
	Sector scan 0-8 or 0-16 miles (25.8 Km). A scan 0-16 miles (25.8 Km). 90° scanning.
	Three simulated targets on the Control Panel.
	Controllable clutter.
	Simulated altitude and landing approach to 33,000 feet/10,000 meters.
	System enables troubleshooting of the control system down to the chip level.
	Malfunction switches are provided for fault insertion.
	Dish scan rate: 3-5 RPM.

LABORATORY MANUAL
The following list of topics indicates the scope of material and experimentation provided by this course.

PART 1: RADAR RANGE MEASUREMENTS

Radar: An Overview
Electromechanical Devices
Radar Antennas and Lines

PART 2: ELECTROMECHANICAL EQUIPMENT

Electric Generators
Electric Motors
Synchros and Synchro Controls
Servo Control Devices and Systems
Stepper Motors and Drive Circuits

PART 3: RADAR SYSTEMS

Introduction to the Experimental Radar System
Radar Display Circuits
Radar Transmitters and Receivers

EQUIPMENT INCLUDED

	S368-1P Circuit Panel
	S368-2 Antenna Control Base
	PRPSB (1) Power Supply Base
	S368-T (3) Targets
	S368T-A (3) Power Adapter, AC
	S368T-TR (3) Tripods for Targets
	S368-5 Cable Set (5 Cables)
	SIP368M Laboratory Manual
	S368BAK Software Floppy Disks or CD
	Computer with 15" Monitor and Keyboard

ORDERING INFORMATION
Order SIP368C. Two manuals are supplied with each Trainer. Order SIP368CM for additional manuals.

TOTAL WEIGHT: 140 lbs (63.5 Kg)