Curriculum
Details

Sample
Activities

Where to Buy
SIC Equipment

Frequently
Asked
Questions

Contact Us

Home

 

 SPECIFICATIONS

SIP410 Programmable Fluid Controllers

The course consists of one Panel on which is mounted a variety of pneumatic controllers. The controllers are all programmable by a PLC (S450C). The course covers both pneumatic and hydraulic devices. The course provides for approximately 175 hours of instruction.

EQUIPMENT SPECIFICATIONS

bullet

The Panel, painted yellow with black lines and lettering, provides the surface for the mounting of Pneumatic Control Devices.

bullet

Includes 35 lb. regulator and meter. 

bullet

Four Fluid Power/Electrical Interface Controllers.

bullet

Includes a Components Kit, which consists of fluid, hoses, and fittings (S410-16K).

bullet

Air Tank: 6 gallons, with hose and pressure gauge.

EQUIPMENT INCLUDED

bullet

SIP410-1P Programmable Fluid Controller Panel

bullet

S410CK Components Kit

bullet

S410-3 Air Tank, 6 gallons, with hose and gauge

bulletSIP410M Laboratory Manual

REQUIRED EXTRA EQUIPMENT

bullet

Smart Builder (S450)

bullet

Power Supply Base (S450PSB)

bullet

Air Compressor w Hose 117 VAC/60 Hz (S410-5)
bullet

0 to 100 PSI,

bullet

1/2 HP

bulletAir Compressor w Hose 220 VAC/50 Hz (S410-6)

LABORATORY MANUAL
The following list of topics indicates the scope of the material and experimentation provided by this course.

  1. Review of PLC Basics

  2. Review of Programmer Operation/Programming Principles

  3. Cylinders -- Construction, Operation, and Applications

  4. Pneumatic Punch Press Control with 3-Way Valve and Single-Acting Cylinder

  5. Use of a Check Valve for Reverse Flow Control

  6. Speed Control of a Fluid Motor by Means of an Orifice

  7. Quick Exhaust Valve and Volume Chamber

  8. Flow Control Valve to Regulate the Rate of Descent of a Pneumatic Jack

  9. Pneumatic Computer Logic: Two-Input AND

  10. Pneumatic Computer Logic: Three-Input AND

  11. Three-Input AND Logic Power Circuit

  12. Pneumatic Computer Logic: Two-Input OR

  13. Pneumatic Computer Logic: Memory Circuit

  14. Pneumatic Computer Logic: Two-Input NAND

  15. Pneumatic Computer Logic: Two-Input NOR

  16. Logic is Logic -- Whether Electronic or Pneumatic

  17. Electronic Sensors

  18. Pneumatic Sensors

  19. Bleed Actuation of a Four-Way Valve

  20. Forming Press Control Circuit with Automatic Retract and Bleeder-Operated Four-Way Valve

  21. Box Filling, Semi-Automated Pneumatic Circuit

  22. Automatic Pneumatic Assembly Machine

  23. Automatic Air Pressure Actuation Circuit with Time Delay on Automated Retract

ORDERING INFORMATION
For the complete course, including one lab manual, order SIP410C. For additional manuals, order SIP410CM.
TOTAL WEIGHT: 25 lbs (11.3 Kg)