Curriculum
Details

Sample
Activities

Where to Buy

Frequently 
Asked
Questions

Contact Us

Home

Introduction to Core Courses: 
Basic Components and Wiring
SIC301 - SIC303 - SIC310 - SIC312 - SIC315C

SCOPE OF THE STUDY
A series of courses, all starting with the letters "SIC", are available in kit form for teaching students how to design, test, and evaluate hand-wired circuits. Each course is separately packaged; however, some courses are available as add-on courses.

Each course consists of a Laboratory Manual with an associated box of components. A wire jumper kit, S300-9, is required to connect the various components together. The Master Builder, S300B, or Breadboard Extender, S300-E, can be used for constructing the various circuits. The S300-E is used in conjunction with a Power Supply Base, S300PSB.

The Components Kit consists of the majority of the parts needed for circuit construction. Some required potentiometers are included in the Master Builder, and may be required when using the S300-E. Other special components, such as electric lamps, step-down transformers, and special connectors, may be available in the testing laboratory supply.

The Components Courses are based on lab manuals and instructor's guides published by the McGraw-Hill Company. One Instructor's Guide per class must be ordered.

COURSE TIME: 100 hours

FEATURES:

1. Complete Series of Basic Courses with Emphasis on Circuit Construction, Testing, and Circuit Analysis
2. Course Manual and Components Kit Provided for each Course
3. Teaches Students How to Develop; and Construct Circuits at the Components Level
4. Circuit Patching Performed on Master Builder
5. No Soldering Required, Only the Use of Precut Colored Jumper Wires
6. Suggested for Use in Core Courses

SIC301C Electronics Fabrication and Repair 
SIC310C Linear Integrated Circuit Components 
SIC312C Telecommunication Circuits Components 
SIC315C General and Biomedical Instrumentation Components

Return to
The Science Instruments Home Page