Curriculum
Details
Sample
Activities
Where
to Buy
SIC Equipment
Frequently
Asked
Questions
MASTER BUILDER S300B
DESCRIPTION
The MASTER
BUILDER, S300B, is a very stable set of power supplies and breadboard
base--all on one basic trainer. Use your existing test equipment with the Master Builder
for designing and evaluating circuits and systems. One trainer serves over 30 courses
ranging from basic AC/DC to Microwave Communications. The trainer, with heavy duty
supplies and integral panel supports, can be used with Component Kit Courses or Insertion
Panels. Heavy-duty metal construction assures sturdy, reliable operation and provides
shielding from 50/60 Hz AC interface pickup.
 | Built-in Potentiometer Decade Box |
| Patching Panel for 8 ICs and Circuits |
| Built-in Audio Amplifier and Two Speakers |
| Fully Protected Power Supplies with Light Indicators |
| BNC Connectors for Scope/Function Generator |
| Interconnecting cable connector for providing power to a separate Panel Base. Complete, self-contained power supplies for 115 V or 230 V (60 Hz or 50 Hz) operation. |
| High-current, good regulation, and automatic overload protection. |
POWER SUPPLY BASE
S300PSB
DESCRIPTION
The POWER SUPPLY, S300PSB, includes the same power supplies as the S300B. It does not have the breadboarding area, connectors, or other associated equipment offered on the S300B in order to minimize cost.
FEATURES
| Power Supply Base for supporting and powering Insertion Panels. |
| Interconnecting cable connector for providing power to a separate Panel Base. |
| Complete, self-contained power supplies for 115 V or 230 V (60 Hz or 50 Hz) operation. High current, good regulation, and automatic overload protection. |
| SIZE: 14" L x 3" D x 3-3/4" H |
| WEIGHT: 5.0 LBS |
PANEL BASE S300PB
DESCRIPTION
The PANEL BASE, S300PB, is a metal support unit designed to accept standard size SIP Insertion Panels offered for the various courses available from the Science Instruments Company. The base contains two 10-pin printed circuit board sockets, a 15 Pin Winchester socket, voltage source indicators, a connecting cable, and panel support rails to provide rigidity to the insertion panels.
There is no power supply in this Panel Base. Power is supplied via the included cable from an S300B or an S300PSB.
FEATURES
| The Panel Base is designed to secure an Insertion Panel |
| An Interconnection Cable to a Master Builder or Power Supply Base is included |
| The Base enables a second or third panel to be used with an Insertion Panel which is operating in a Master Builder or in a Power Supply Base. |
| SIZE: 14" L x 3" D x 3-3/4" H |
| WEIGHT: 3.0 LBS |
Return
to
The Science Instruments
Home Page
The
Science Instruments Company
6122 Reisterstown Road. Baltimore, Maryland 21215-3487
Phone: (410) 358-7810 (800) 229-2114
Fax: (410) 358-0935 E-Mail: info@omgsic.com
Web: www.omgsic.com